C6103 (bizhub C754e/C654e)
Contents
| Trouble type | Slider over running |
| Trouble code | C6103 |
| Rank | B |
| Detection timing | The scanner home sensor detects the scanner at its home position during a period of time that begins with the time when a pre-scan command and a scan preparation command are executed and ends when a home return command is executed. |
| Trouble isolation | Scanner |
| Relevant electrical parts | • Scanner home sensor (PS201) • Scanner motor (M201) • Scanner drive board (SCDB) • MFP board (MFPB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical components |
| 1 | Correct or change the scanner drive (pulley, gear, belt) if it is faulty. | – | – |
| 2 | Correct the scanner motor set screw if loose. | – | – |
| 3 | Adjust [Image Position Leading Edge] and [Feed Direction Adjustment]. | – | – |
| 4 | Check the PS201, M201, SCDB and MFPB connector for proper connection and correct as necessary. | – | – |
| 5 | PS201 I/O check, sensor check | SCDB PJ6-3 (ON) | 17-V |
| 6 | M201 operation check | SCDB PJ4-1 to 7 | 17-V |
| 7 | Replace SCDB (Part# A2X0H01A01Old or Part# A2X0H01A12) | – | – |
| 8 | Replace MFPB (Part# A2X0H02015) | – | – |
- Link to the wiring diagram (N.1. bizhub C754e/C654e)
- Link to the layout drawings for related parts by each trouble code (S.92. C6102, C6103)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.3.11.3 (Link to the Field Service Manual)