10-40 (bizhub C364/C284/C224)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | Misfeed at manual bypass feed section | |
| JAM code | 10-40 | |
| Detection timing | For paper fed from the manual bypass, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | |
| – | In case paper position is detected as locating properly after main power switch is turned ON, door and cover are opened / closed or jam/trouble reset is done, it is regarded as paper jam at manual bypass feed section. | |
| Misfeed processing location | Right door | |
| Relevant parts | -Transport motor (M1) -Registration clutch (CL4) -Bypass paper feed clutch (CL7) -Bypass pick-up solenoid (SD1) -Registration roller (PS1) -Front side board (FRB) -Printer control board (PRCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS1 I/O check, sensor check | FRB CN8-3 (ON) | 4 to 5-L |
| 3 | CL4 operation check | FRB CN8-7 (CL4_24V) | 4-L |
| 4 | CL7 operation check | PRCB CN27-8 (ON) | 3-C |
| 5 | SD1 operation check | PRCB CN27-10 (ON) | 4-C |
| 6 | M1 operation check | PRCB CN31-2 (REM)PRCB CN31-5 (LOCK) | bizhub C364 21-Jbizhub C284 22-Jbizhub C224 24-J |
| 7 | PRCB ICP5 conduction check | – | – |
| 8 | Replace FRB (Part# A161H00501) | – | – |
| 9 | Replace PRCB (Part# A161H00108) | – | – |
- Link to the wiring diagram (N.1. bizhub C364/C284/C224)
K1.6.1 (Link to the Field Service Manual)