C7115 (bizhub 950i/850i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
Trouble type | C7115: Bypass lift-up motor failure |
Rank | C |
Trouble detection condition | After starting the motor, an error is detected for the malfunction detection signal. |
Trouble isolation | Manual |
Relevant electrical parts | – Bypass lift-up motor (M28) – 2nd transfer pressure motor (M3) – Paper feed/transport drive board (PFTDB) |
Procedure
- Check the connector between M28-relay CN195B-PFTDB CN9 for proper connection and correct as necessary.
- Check the connector of M28 for proper drive coupling and correct as necessary.
- M28 conduction check.
- Control signal: PFTDB CN9-1, 2
- Location of electrical component: 16-P
- Replace M28.
- Replace M3.
- Replace PFTDB.