C0202 (bizhub C759/C659)

Posted
ByAdministrator Administrator
You are here:

Contents

Trouble typeC0202: Tray 1 feeder up/down abnormality
RankB
Trouble detection conditionThe tray 1 upper limit sensor (PS6) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolationTray 1
Relevant electrical parts-Tray 1 upper limit sensor (PS6)
-Tray 1 lift-up motor (M6)
-Paper feed/transport drive board (PFTDB)

 Procedure

  1. Remove the tray and check to see if a piece of paper is not left inside the machine.
  2. Check the connector between M6-PFTDB CN25 for proper connection and correct as necessary.
  3. Check the connector of M6 for proper drive coupling and correct as necessary.
  4. Check the connector between PS6-relay CN145-PFTDB CN14 for proper connection and correct as necessary.
  5. PS6 I/O check, sensor check
    • Control signal: PFTDB CN14-3 (ON)
    • Location of electrical component: 1-P
  6. M6 load check
    • Check code: 23
    • Multi code: 4
    • Control signal: PFTDB CN25-10 to 11
    • Location of electrical component: 2-X
  7. Replace M6. (Part# A2X0M12001)
  8. PFTDB F10 conduction check
  9. Replace PFTDB. (Part# A795H00200)

L.3.7.3 (Link to the Field Service Manual)