How Can We Help?
C0204 (bizhub 364e/284e/224e)
Contents
| Trouble type | Tray 2 feeder up/down abnormality |
| Trouble code | C0204 |
| Rank | B |
| Detection timing | The tray 2 upper limit sensor (PS22) is not blocked even after the lapse of a given period of time after the lifting motion has been started. |
| Trouble isolation | Tray 2 |
| Relevant electrical parts | • Tray 2 lift-up motor (M13) • Tray 2 upper limit sensor (PS22) • Printer control board (PRCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M13-PRCB CN20 for proper connection and correct as necessary. | – | – |
| 2 | Check the connector of M13 for proper drive coupling and correct as necessary. | – | – |
| 3 | Check the connector between PS22-relay CN40-PRCB CN19 for proper connection and correct as necessary. | – | – |
| 4 | PS22 I/O check, sensor check | PRCB CN19-6 (ON) | 9-C |
| 5 | M13 operation check | PRCB CN20-5 (REM) | 2-C |
| 6 | Replace M13 (Part# 9J06M10300) | – | – |
| 7 | PRCB ICP4 conduction check | – | – |
| 8 | Replace PRCB (Part# A61FH00101) | – | – |
- Link to the wiring diagram (N.1. bizhub 364e/284e/224e)
- Link to the layout drawings for related parts by each trouble code (S.7. C0204)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.3.5.7 (Link to the Field Service Manual)