C0204 (bizhub C287/C227)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble type	C0204: Tray 2 feeder up/down abnormality
Rank	B
Trouble detection condition	The tray 2 upper limit sensor (PS22) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolation	Tray 2
Relevant electrical parts	-Tray 2 lift-up motor (M13) -Tray 2 upper limit sensor (PS22) -MFP board (MFPB)

 Procedure

1. Remove the tray and check to see if a piece of paper is not left inside the machine.
2. Check the connector between M13-MFPB CN7E for proper connection and correct as necessary.
3. Check the connector of M13 for proper drive coupling and correct as necessary.
4. Check the connector between PS22-relay CN55-MFPB CN5E for proper connection and correct as necessary.
5. PS22 I/O check, sensor check
   • Control signal: MFPB CN5E<B>-9 (ON)
   • Location of electrical component: 11-C
6. M13 operation check
   • Control signal: MFPB CN7E<A>-13 to 14
   • Location of electrical component: 23-C
7. Replace M13. (Part# 9J06M10300)
8. MFPB F13E conduction check
9. Replace MFPB. (Part# A797H02118)

NOTICE

• Link to the wiring diagram (bizhub C287/C227)

K.3.7.7 (Link to the Field Service Manual)