C0206 (bizhub C360i/C300i/C250i)
Contents
| Trouble type | C0206: Tray 3 feeder up/down abnormality (When PC-116 or PC-216 is installed) |
| Rank | B |
| Trouble detection condition | The tray 3 upper limit sensor (PS116) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began. |
| Trouble isolation | Tray 3 |
| Relevant electrical parts | •Tray 3 lift-up motor (M113) • Tray 3 upper limit sensor (PS116) • PC control board (PCCB) • CPU board (CPUB) • Base board (BASEB) |
Procedure
- Remove the tray and check to see if a piece of paper is not left inside the machine.
- Check the connector between M113-PCCB CN6C for proper connection and correct as necessary.
- Check the connector of M113 for proper drive coupling and correct as necessary.
- Check the connector between PS116-relay CN24-PCCB CN4 for proper connection and correct as necessary.
- Check CPUB for proper installation and correct as necessary.
- PS116 I/O check, sensor check
- Control signal: PCCB CN4-3 (ON)
- Location of electrical component: PC-116/PC-216 7-C
- M113 load check
- Check code: 23
- Multi code: 6
- Control signal: PCCB CN6C-8 to 9
- Location of electrical component: PC-116/PC-216 2-C
- Replace M113. (Part# 9J06M10300)
- Replace PCCB. (Part#AAV5H00101 / PC-216 Part# AAV5H00201)
- Replace CPUB. (Part# AA2JH02N06)
- Replace BASEB. (Part# AA2JH02005)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
L.3.6.8 (Link to the Field Service Manual)