C0211 (bizhub C554/C454)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
Trouble type | Manual feed up/down abnormality |
Trouble code | C0211 |
Rank | B |
Detection timing | -Paper does not unblock the bypass lift-up position sensor (PS26) even after the paper feed motor (M22) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. -The bypass lift-up position sensor (PS26) is not blocked even after the paper feed motor (M22) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. |
Trouble isolation | Manual |
Relevant electrical parts | -Paper feed motor (M22) -Bypass pick-up solenoid (SD1) -Bypass lift-up position sensor (PS26) -Printer control board (PRCB) -Expansion control board (EXCB) |
(2)Procedure
Step | Action | Control signal | Location of electrical components |
1 | Check the connector between M22-EXCB CN3 for proper connection and correct as necessary. | – | – |
2 | Check the connector of M22 for proper drive coupling and correct as necessary. | – | – |
3 | Check the connector between PS26-relay CN19-PRCB CN27 for proper connection and correct as necessary. | – | – |
4 | Check the connector between SD1-relay CN21-relay CN19-PRCB CN27 for proper connection and correct as necessary. | – | – |
5 | PS26 I/O check, sensor check | PRCB CN27-13 (ON) | 4-C |
6 | SD1 operation check | PRCB CN27-10 (ON) | 4-C |
7 | M22 operation check | EXCB CN3-5 to 8 | 22-P |
8 | Replace M22 (Part# A2XKM10000) | – | – |
9 | EXCB IC4 conduction check | – | – |
10 | Replace EXCB (Part# A2XKH00502) | – | – |
11 | Replace PRCB (C554 Part# A2XKH00104 / C454 A4FJH00104) | – | – |
- Link to the wiring diagram (N.1. bizhub C554/C454)
- Link to the layout drawings for related parts by each trouble code (S.11. C0211)
K3.5.11 (Link to the Field Service Manual)