C1196 (bizhub C364/C284/C224)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| Trouble type | Center fold roller motors malfunction | |
| Trouble code | C1196 | |
| Rank | B | |
| Detection timing | <When FS-534+SD-511 is installed> The guide home sensor (PS7) is not blocked or unblocked even after the set period of time has elapsed after the center fold roller motor (M8) is turned ON. | |
| Trouble isolation | Half-Fold/Tri-Fold Center Stapling | |
| Relevant electrical parts | -Center fold roller motor (M8) -Guide home sensor (PS7) -SD drive board (SDDB) -FS control board (FSCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M8-SDDB J8 for proper connection, and correct as necessary. | – | – |
| 2 | Check the connector of M8 for proper drive coupling, and correct as necessary. | – | – |
| 3 | Check the connector between PS7-SDDB J9 for proper connection, and correct as necessary. | – | – |
| 4 | PS7 I/O check, sensor check | SDDB J9-6 (ON) | SD-511 4-G |
| 5 | M8 operation check | SDDB J10 6 to 9 | SD-511 1 to 2-F to G |
| 6 | Replace M8 (Part# A3EPPP5500) | – | – |
| 7 | Replace SDDB (Part# A3ERPP6J03) | – | – |
| 8 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.2.8 SD-511)
- Link to the layout drawings for related parts by each trouble code (S.33. C1196)
K3.6.21(Link to the Field Service Manual)